2
ASSEMBLE CABLE ARM ASSEMBLY
401
100
403
81
100
100
104
100
79
100
100
432
427
402
3
1
104
427
104
100
432
100
Remember to keep all BOLTS loose to ensure the holes will align easily.
1. Attach
CABLE ARM ASSEMBLY (401)
to
CABLE ARM CONNECTOR (402)
, using two
3/8" X 1"
HEX BOLTS (427)
and two
3/8" WASHERS (432)
then attach
CABLE ARM CONNECTOR (402)
to
FRONT UPRIGHT (3)
, using two
3/8" X 4" HEX BOLTS (79)
, four
3/8" WASHERS (100)
and two
3/8" NYLON NUTS (104)
.
2. Attach
CABLE ARM ASSEMBLY (401)
and
STABILIZING
PLATE (17)
to
BASE FRAME (1)
, using two
3/8" X 3-1/4"
HEX BOLTS (81)
, four
3/8" WASHERS (100)
and two
3/8" NYLON NUTS (104)
. You may need to loosen
the bolts at the top of the CABLE ARM ASSEMBLY
Bottom Frame to help the holes line up.
3. Slide the axle of each
CABLE ARM (403)
through
the holes on the selector plate in The
CABLE ARM
ASSEMBLY (401)
and then fasten using the
STEEL
SPACER (410)
, and
AXLE COLLARS (411)
. Tighten
the set screw on the
AXLE COLLARS (411)
with a
5/16" Allen Wrench. Check to ensure that each
CABLE ARM (403)
pivots freely and that cables are not
twisted.
411
411
410
403
430
410
430
17
