BodyCraft F705, Owner'S Manual

Page: 9 / 16

Product Assembly
S
TEP 2b: Back Support
Attach BACK SUPPORT - Assembly
(3-ASM) to the MAIN FRAME - Assembly
(1-ASM) using:
● One HEX BOLT, 1/2" x 5" (11)
● Two FLAT WASHERS, 1/2" (14)
● One NYLON NUT, THICK, 1/2" (15)
Lock-In BACK ADJUSTER (20)
lower brace onto a hook on the
MAIN FRAME - Assembly (1-ASM).
S
TEP 2c: Handle
Attach HANDLE (5) to the BACK
ADJUSTER (20) by turning
clockwise until fully secure..
TIP:
Fully tighten both HEX BOLTS
(11), then loosen their locking NYLON
NUT, THICK (15) approximately 1/4
turn so that SEAT SUPPORT -
Assembly (4-ASM) & the BACK
SUPPORT - Assembly (3-ASM) pivot
freely, without excessive movement.
S
TEP 2a: Seat Support
Attach SEAT SUPPORT - Assembly (4-ASM)
to the MAIN FRAME - Assembly (1-ASM)
using:
● One HEX BOLT, 1/2" x 5" (11)
● Two FLAT WASHERS, 1/2" (14)
● One NYLON NUT, THICK, 1/2" (15)
9/16 SOCKET &
6” EXTENSION
9/16 WRENCHES
Recommended Tools
9
Recommended Tools
3/4 SOCKET &
6” EXTENSION
3/4 WRENCHES