BodyCraft Cable Pull Station, Assembly And Operating Instructions Manual, Page: 23 / 30

Cable Pull Station
23
7.3 Parts list
No. Description Qty. No. Description Qty.
1 MAIN FRAME 1 28 50mm ROUND CAP 2
2 BASE FRAME 2 29 30mm X 70mm HOLLOW 2
3 TOP FRAME 1 30 CABLE 1
4 CABLE HEIGHT ADJUSTER 1 31 COUNTER BALANCE CORD 1
5 FRONT UPRIGHT 1 32 HANDLE BAR 1
6 REAR UPRIGHT 1 33 HANDLE BAR BRACKET 1
7 GUIDE ROD 2 34 BUSHING 4
8R RIGHT SUPPORT FRAME 1 35 STOPPER 6
9L LEFT SUPPORT FRAME 1 36 PLASTIC WASHER 2
10 DECORATION PANEL 1 37 SPRING 1
11 SWIVEL PULLEY HOUSING 2 38 1/2“ X 4-1/4“ HEX BOLT 2
12 DOUBLE PULLEY BRACKET 1 39 1/2“ X 3-3/4“ HEX BOLT 4
13 PULLEY BRACKET 1 40 1/2“ X 1-3/4“ HEX THREADED BOLT 1
14 SELECTOR ROD 1 41 3/8“ X 3“ HEX BOLT 4
15 TOP PLATE 1 42 3/8“ X 2-3/4“ HEX BOLT 4
16 WEIGHT PLATE 14 43 3/8“ X 1-3/4“ HEX BOLT 10
17 RUBBER DONUT 2 44 3/8“ X 1“ HEX THREADED BOLT 4
18 PLASIC GUIDE ROD HOLDER 4 45 3/8“ X 3/4“ HEX THREADED BOLT 1
19 90mm PULLEY 13 46 5/16“ X 1/2“ INNER HEX SCREW 2
20 50mm PULLEY 1 47 M8 X 10mm INNER HEX SCREW 6
21 8mm CLIP 2 48 M6 X 40mm SET SCREW 1
22 6mm CLIP 2 49 M6 X 20mm SET SCREW 2
23 SINGLE HANDLE 2 50 PIN BOLT 1
24 STACK SPACER 2 51 TOP PLATE BOLT 1
25 SELECTOR PIN 1 52 1/2“ WASHER 5
26 40mm X 80mm OVAL END CAP 4 53 3/8“ WASHER 5
27 30mm X 70mm OVAL CAP 4 54 1/2“ SPRING WASHER 4