User Guide e-CELSIUS Performance.2
EN
13
This button allows navigate in the menu.
Arrow down (ref. 5 Picture 9: Description of the e-Viewer® performance monitor)
This button allows to navigate in the menu.
Sleep/wake-up (ref. 6 Picture 9: Description of the e-Viewer® performance monitor)
The button sleep-wake of the screen allows to switch on or off the screen.
The simultaneous use of the button sleep-wake (ref. 6
Picture 9: Description of the e-Viewer®
) and the button Home (ref. 2
Picture 9: Description of the e-Viewer®
) allows to switch on or off the monitor if no capsule are associated.
This mode is recommanded for the shelf storage of the monitor. The simultaneous use of the
buttons : Home / Sleep-Wake allows to turn off the monitor. This same procedure has to be
repeated to turn on the monitor.
The LEDs
An orange LED and a green LED are positioned on the front of the monitor; in the upper right
corner.
When the orange LED flashes, it means that the battery level is low; the monitor has to be
plugged, quickly, to a power source.
When the monitor is charging for the first time after a complete discharge of the battery, the
orange LED may be blinking in order to inform of the very low level of battery. In this case, the
screen is kept switched off for few minutes in order to get minimum level of charge.
When the green LED is lit, it means that the monitor is connected to a power source. Its battery
is charging.
Battery
Information
When it is not plugged to the main supply, a rechargeable lithium-ion battery powers the
monitor. It is strictly FORBIDDEN to disassemble the monitor and to replace the rechargeable
battery under penalty to irreparable damage on the system and security failures.
Charging cycle
In order to recharge the battery, simply plug the power supply of the monitor on the mains
supply and switch off the screen. Few hours are necessary to charge the battery. The battery
life of the monitor in battery operation is around 36h (screen regularly used but not
continuously).
