PBC528 PBC530 PBC602
Page 7
Assembly STEP 1
With the help of an assistant, align and attach the
Rear Bottom
Frame (#01)
to the
Left Bottom Frame (#02)
as illustrated in the
diagram.
Insert two
Hex Bolts (#17)
through two
Washers (#18)
followed by
the
Left Bottom Frame (#02)
and
Rear Bottom Frame (#01)
.
Secure them together using two
Nylon Nuts (#20)
.
Repeat this process on the other side using
Right Bottom Frame
(#22)
.
#18 Washer (M10)
[4 Pieces]
#20. Nylon Nut (M10)
[4 Pieces]
Hardware Required
NOTE:
To avoid misalignment due to over-tightening, please do
not use a wrench at this time.
Hand-tightening for now will help ensure easy assembly.
Wrench-tightening should be performed after all parts
are assembled to ensure all nuts, bolts, and parts are
tightly secured before use.
#17 Hex Bolt (M10x80 mm)
[4 Pieces]
