Bodmer Ton AG
Holzrüti 1
CH-8840 Einsiedeln
Phone
+41 55 418 28 58
Website
www.bodmer-ton.ch
7
Enter the temperature segments:
Save the programme:
3.3.1.
Meaning of the LED’s
The blinking of the LED's will have following meanings:
t0:
Delay time
The firing process will be delayed after pushing the button by the set amount
of time.
Note:
The delay time cannot be saved to a programme.
t1 - t6:
heat-up, soak, cool-off times
Here you can enter heat-up, soak and cool-off times.
Note:
When entering a cool-off time, you cannot cool-off the furnace faster than its
natural cooling.
end: This LED shows that the firing process has been finished and the heating has
been switched off. The furnace will now cool off.
The LED's above the time LED's show the currently set temperature of the segment.
4.
The firing process:
After choosing a program (see chapter 3.1), and pressing the button, the firing process will be
started. In case that you have entered a delay time, the delay time will be displayed and counted
backwards after starting the programme. As soon as the time reaches zero, the actual firing process
will be started. The delay time is especially useful for furnaces that use night power which is cheaper.
The controller will start to carefully heat up the furnace in segment
t1
to the temperature of the first
segment. As soon as the temperature has been reached, the controller will start with the next
