11
ENGLISH
troubleshooting Guide
ProBLeM
PossiBLe cause
soLution
No LCD Display
Batteries not installed
Install Batteries
Batteries installed incorrectly
Check Polarity matches
Batteries are dead
Replace batteries
LCD Display shown
but no function
No skin contact
Use Conductive Gel on conductive
area of belt and directly onto skin
Unit not snapped on
belt correctly
Check that the unit is connected
firmly with both connectors
to the belt
Intensity level at minimum
Push ON/HI button to increase
intensity. Replace batteries
Microprocessor hang up
Reset by pressing RESET button or
removing batteries for 1 minute.
Re-insert batteries
Batteries are low
Change batteries
LCD Display function
normal, but nothing occurs
Intensity set too low
Push ON/HI button several
times to increase
Not enough Conductive Gel
on the belt
Put more Conductive Gel
between belt and skin
Used gel is not water based
Read label of the gel used.
Make sure you find ‘water’ or
The belt is positioned
incorrectly
Move belt around to locate your
trigger points
Belt is worn or has oil
deposits
Clean the belt or replace by
contacting the supplier
Batteries are low
Change batteries
Microprocessor hang up
Change batteries
LCD Display not functioning
correctly, all buttons do not
work
Batteries are low
Reset by pressing RESET button or
removing battery for
1 minute. Re-insert battery
Change batteries
