5.6 Time and date
To change the time or the date of the SIGMA, validate the option with the
key,
The following screen is displayed :
You have access to the time zone
selection.
The time zone selection allows you to
automatically manage winter/summer time changeovers.
If the zone is not available in the 20
pre-programmed towns or time zones,
select “PROG” mode which is
programmed in the technician menu.
“PROG” mode allows you to configure personalised time zone differentials
and time changeovers.
By default it is in “PROG” mode.
The hour is flashing: set the hour using
the
and
keys and move on to
the minutes with the
key.
Proceed in the same way for the date.
Validate with the
key. If the time has been changed, the seconds are
reset to 0.
12
Time and date ok
Dy
namic re
cep
tion õ
Time zone : LON
DON ú
(GMT + 0h00) ok
Time zone :PROG ú
(GMT) ok
Time 10:12:00 ú
Date 20/12/2007 ok