4.
a
The sub-menu
Language1
is displayed
8
.
The display language flashes. Choose the language with [+] (table
below) and validate with [SEL].
4.
b The sub-menu
Language2
appears.
Choose with [+] from the different options :
“--”, to validate the first language only,
5.
The
sub-menu
Display appears.
It enables you to obtain :
time display only, choose FIX with [+] an alternating display:
alternating between the hour and the temperature Celsius,
choose°C with [+].
alternating between the hour and the temperature
Fahrenheit, choose°F with [+].
Validate with [Sel]
.
6.
The sub-menu Second is displayed
It permits to obtain :
Choice of SEC 1 :
Progressive display of the seconds ring.
Choice of SEC 2 :
Degressive display of the seconds ring
Choice of SEC 3 :
Display of three notches moving forward every second
33
8
Reminder : At any time, by holding down [SEL] then pressing [+] quickly, it is possible to go to
normal display mode and exit the configuration menu.
