![background image](http://html.mh-extra.com/html/bodet/btx6015/btx6015_installation-manual_2782405006.webp)
6
2.6 DIPs settings
Panel card
Open the panel by unscrewing the two screws on one side of the scoreboard and then slide the glass,
taking care not to damage the LEDs on the display.
On the first DIP bank
Dips 1 to 4 are used for the factory setting of the panel.
Out of the factory the dips are set as follow :
Dip 1
Dip 2
Dip 3
Dip4
on ↑
off ↓
off ↓
off ↓
Dips 5 to 7 are used to set the panel number (if several panels are to be controlled on the same
site, each panel needs to have its own number).
Dips 8 is not used.
On the second DIP bank
Dips 1 to 3 are used to determined the installation number.
Dips 4 to 8 are not used.
First DIP bank
Second DIP bank
Panel number
Dip 5
Dip 6
Dip 7
1
off ↓
on ↑
on ↑
2
on ↑
off ↓
on ↑
3
off ↓
off ↓
on ↑
4
on ↑
on ↑
off ↓
5
off ↓
on ↑
off ↓
6
on ↑
off ↓
off ↓
Installation number
Dip 1
Dip 2
Dip 3
1
off ↓
on ↑
on ↑
2
on ↑
off ↓
on ↑
3
off ↓
off ↓
on ↑
4
on ↑
on ↑
off ↓
5
off ↓
on ↑
off ↓
6
on ↑
off ↓
off ↓