![background image](http://html.mh-extra.com/html/bodet/btx6015/btx6015_installation-manual_2782405031.webp)
31
2.3 Electrical connection
Most of the BTX6120 WP cabling is done at the factory. These
instructions deal with the cabling to be done during the installation
at the customer site.
1/ Open all the access doors.
2/Connect the 240V + earth power cable to the terminal
block of the BTX6120 WP(A). (the power cable (3x1,5²)
is not supplied by BODET).
3/ The Dip switches are configured at the factory. Check
that they are correctly set.
A
C
C
Tear dop shaped holes for wall mounting
with Ø8 screws and wall anchors
R4.50
76
118
1130
1076
120 maxi
1500
1200