Steel frame Table form lift TL 1512
90
213300043
10.2.2 Rescue control (only by technical personnel)
The rescue control system is one option to operate the Table lift
briefly after a malfunction and to move the platform to next loading
position.
NOTE!
The rescue control system allows only to move the
Table lift upward.
Dead man’s operating mode
this means, the platform moves as long as the
control button is pressed. If the button is released,
the lift stops.
Fig
.
55: Opening the platform electrical cabinet
1.
Remove the platform cover in
front of the electrical cabinet and
open the electrical cabinet. The
electrical cabinet is located on
the right-hand side below the
platform wall.
DANGER!
Risk of electrical shock!
After opening the electrical cabinet, there is access to live components. Therefore, do not reach
inside the electrical cabinet and do not touch live components. Risk of electrical shock that can
be fatal.
Mode of operation switch and
Rescue control button
