EN
21
3.7
Hand switch
The hand switch includes an integrated locking mechanism that allows nursing staff to
fully or partially lock hand switch operations with a key.
Lockable hand switch, user error protection
The ergonomically shaped hand switch allows users to control the bed’s basic functions
with either six or ten large, safe-to-operate buttons. Each button is marked with an ap-
propriate symbol. The position adjustment motors will continue to run as long as the cor-
responding button is pressed. A coiled cable offers the necessary freedom of movement
during use.
The rear-mounted hanger can be used to hang the hand switch on the nursing care bed,
e.g. during cleaning or when providing patient care. To keep the hand switch from getting
in the way, simply clip it anywhere on the bed frame.
* availability depends on model
** This button will only raise the bed
into the sitting position. The af-
fected sections must each be low-
ered individually.
Back rest up
Back rest down
Lower leg rest up
Lower leg rest down
Mattress support frame up
Mattress support frame down
Feet-down position (anti-Trendelenburg)*
Head-down position (Trendelenburg)*
Comfortable sitting position* (upward
only**)
Release bed lowering function*
Light on/off*
Bock Safety Note
The maximum activation time of 2 minutes must not be exceeded. No further adjustments
may be made for at least 18 minutes afterwards.
