10
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1. Set the channel switch on the RF
modulator (not supplied) (Radio
Shack cat. # 15-1283A) to VHF
channel 3 or 4, whichever is not
used or the least used in your
area.
2. Connect the RF modulator to the
Composite Video Output and
Right/Left audio channel jacks on
the unit.
3. Use an RF coaxial cable to
connect the TO TV jack on the
adapter to the ANTENNA IN jack
on the back of your TV.
You may need to disconnect the
antenna/cable from your TV to
make this connection. Connect the
antenna/cable to the ANTENNA IN
jack on the RF modulator.
4. Connect one end of the telephone
cable to the unit’s telephone jack.
Connect the other end to the
telephone wall jack.
5. Connect the proper end of the AC
power cord to the unit’s power
receptacle.
6. Set your TV to channel 3 or 4, as
selected in step 1 above.
VHF/UHF
1
4
AC
POWER
CORD
5
TV
Connecting to a TV or VCR without Audio/Video Jacks
Out to TV
2
3
6
RF Modulator
RF coaxial cable
TELEPHONE
CABLE
A/V Cable
Video
Cable
Out to TV
Connections
RF coaxial cable
NOTE: If your television or TV
remote has a TV/video button,
push this button.
