6
BOC Smoothcut Plasma 40 Operating manual
1.3 Electrical Shock
• Never touch ‘live’ electrical parts.
• Always repair or replace worn or damaged parts.
• Disconnect power source before performing any maintenance
or service.
• Earth all work materials.
• Never work in moist or damp areas.
Avoid electric shock by:
• Wearing dry insulated boots.
• Wearing dry leather gloves.
• Working on a dry insulated floor where possible.
1.4 User Responsibility
• Read the Operating Manual prior to installation of this machine.
• Unauthorised repairs to this equipment may endanger the technician
and operator and will void your warranty. Only qualified personnel
approved by BOC should perform repairs.
• Always disconnect mains power before investigating
equipment malfunctions.
• Parts that are broken, damaged, missing or worn should be
replaced immediately.
• Equipment should be cleaned periodically.
BOC stocks a huge range of personal protective equipment. This,
combined with BOC’s extensive Gas and Gear network, ensures fast,
reliable service throughout the South Pacific.
STOP
PLEASE NOTE that under no circumstances should any
equipment or parts be altered or changed in any way from
the standard specification without written permission given
by BOC. To do so, will void the Equipment Warranty.
Further information can be obtained from Welding Institute of Australia
(WTIA) Technical Note No.7.
Health and Safety Welding
Published by WTIA,
PO Box 6165 Silverwater NSW 2128
Phone (02) 9748 4443
24799 Smoothcut Plasma 40 OP Manual CC D7.indd 6
16/04/2014 1:00 pm
