Edge Sensors
Edge Sensors
If bObi repeatedly backs up or displays an error message (Er 01) while cleaning dark-colored carpet,
then you’ll need to deactivate the edge sensors. Make sure bObi’s is turned ON before proceeding.
When the edge sensors
are deactivated, bObi is
unable to detect stairs
or sharp drops. You
may use blOck to keep
her away from these
obstacles.
Quick Tip:
Deactivating bObi’s Edge Sensors
Peel off the backs of each blindfold sticker and
place one onto each of bObi’s 4 edge sensors.
Make sure each sensor is completely covered.
Remove the blindfold stickers, and wipe the sensor
covers clean to reactivate bObi’s edge sensors.
Parts You’ll Need:
Blindfold Stickers
64
63
