Setting the Current Time and Day
Setting the Current Time and Day
bObi can be programmed to clean at the same time on multiple days of the week through her
FullCommand™ remote. To set bObi’s cleaning schedule, you must first set the current time and
day on her remote. Make sure bObi is turned ON and synced to her remote before proceeding.
1.
Press the CUR TIME button on the remote.
The first hour digit will start flashing.
2.
Use the LEFT and RGHT buttons to move
between minutes, hours, and days of the
week. Use the FWD and BACK buttons to
adjust your selection.
3.
Press the CUR TIME button again to save
your settings. bObi will chirp to confirm
your save.
The remote works on a 24-hour clock, so adjust accordingly.
Parts You’ll Need:
FullCommand™
AAA Batteries x2
Remote
(not included)
40
39
