Bob’s Space Racers Inc. |
Rescue 1™ Operator’s Manual (V1.SEPT2014)
23
9.
T
ROUBLESHOOTING
:
10.
11.
9.1 Troubleshooting Philosophy:
When troubleshooting any product, certain general guidelines should be followed.
1. Always check to be sure that your game is turned on. Be sure that all of the
fuses in the game are functional and check to see that the AC voltage is in the
proper operating range for your game.
2. Check to be sure that all of the game harnessing is plugged in properly and that
all of the pins are firmly seated in the connectors. It is always possible that a
harness can be damaged by rough shipping or moving.
3. Check game harnessing to be sure that none of the wires have become or are
damaged. Using a handheld multi-meter, check continuity of the wires to make
sure they are not broken.
4. Check for obvious damage to the P.C. Boards or electrical components.
5. If you have multiple games or multiple parts on a game, change or exchange
the parts and see if the problem goes away or moves to another location. This way
you can quickly eliminate certain parts as being the problem with the game.
6. When changing electronic or electrical components, ALWAYS turn off and
unplug the game.
7. Check to see that all power supplies are delivering the specified voltages to the
P.C. Boards and components as shown in the manual.
WARNING
For your safety, and to reduce risk of damage to your game; read the
Important Safety Information in Chapter 2 before attempting any
troubleshooting procedure.
