Bob’s Space Racers Inc. |
Rescue 1™ Operator’s Manual (V1.SEPT2014)
21
8.
M
AINTENANCE AND
I
NSPECTION
(C
ONTINUED
):
8.4 Changing the water filter:
It is highly recommended to change the water filter for the game every month
in order to keep the game clean. Fully read and follow the below steps in
order to properly change the water filter:
8.5
Low/No water indicator:
The Low/No Water Indicator is located to the right of
the player #2 gun. The indicator is connected to a
sensor located inside the water holding pan and will
detect if there is a proper amount of water to operate
the game. The indicator will light when water needs to
be added to the game.
1.
Only change the water filter while the game is
completely drained.
2.
Before removing the water filter, place a large
towel under the filter housing to catch any
water that may spill out.
3.
Using the filter wrench, turn the filter housing
clockwise to remove the filter.
4.
Pour any excess water into a bucket and
discard.
5.
Remove the old water filter and replace with a
standard (20 Micron) paper sediment water
filter.
6.
Replace the filter housing, by turning the
housing counter-clockwise.
LOW/NO WATER INDICATOR
