Bob’s Space Racers Inc. |
Rescue 1™ Operator’s Manual (V1.SEPT2014)
10
4.
I
NSTALLATION
(C
ONTINUED
):
4.4
Installing the Marquee:
Tools needed to install the marquee: #6mm hex head key
#6 Hex Head Bolts
2. Once the marquee is
fastened, feed the
marquee light wires
through the access hole.
3. Bring all excess wire
to the bottom portion of
the game unit.
4. Connect the four pin
plug and the two pin
plug from the marquee
into the corresponding
plugs from the game
unit, and then replace
the marquee access
panel.
1.
Remove the marquee access panel from
the rear of the game unit to gain access to
needed wiring.
2.
Two people are recommended. Place the
marquee on top of the game and secure
the marquee with four (4) #6mm hex head
bolts. Be careful not to pinch the wiring
when securing the marquee.
