BOB’S SPACE RACERS® PUPPY JUMP
TM
ARCADE GAME MANUAL
17
3. Carefully twist back the Plexiglas
back to remove from cabinet as
shown in Fig. 4.
Fig. 4
Removing the Jump Assembly
Note:
Do Not remove the Jump Assembly if you are just going to make adjustments to the Toy or
Solenoid Height. The Jump Assembly and Score Board Plexiglas Must be in place and fastened
down to do that (see Adjusting the Toy and Solenoid Heights).
1. Remove the four (4) Screws from the
Score Board Plexiglas.
Fig. 5
2. Carefully remove the Score Board
Plexiglas and set aside.
Fig. 6
