background image

WARNING: TURN ELECTRICAL POWER SUPPLY OFF 

BEFORE MAKING ELECTRICAL CONNECTIONS. DRYER 

MUST BE GROUNDED (EARTHED).

A

B

C

x 2

1

2

A

B

C

x 2

1

2

CL

LEAF0344 Issue 01

>

0.5m

X

1

{

X

x 4

A

B

C

A

B

x 2

CL

x 2

1

2

8mm

1.

2.

3.

4

9

A

B

CL

3

3 B

A

AIRDRI

Form No. 7180-7188-69_ii Multi Language  (Revised 2/3/16)    © 2016 Bobrick Washroom Equipment, Inc.    Printed in U.S.A.

Electrical Characteristics

Recommended Mounting Heights

Removal of Cover

Installation of Mounting Base

Important

2

Hand dryer models B-7180 or B-7188115V AC, 20 Amp, 50/60 Hz, Single Phase, cULus listed;
Hand dryer models B-7180 or B-7188 208-240V AC, 9-10 Amp, 50/60 Hz, Single Phase, cULus listed and CE marked.

Distance from floor to bottom mounting screw holes of mounting base. (Dimension A)

1.  Start installation of dryer by  

  removing cover. To loosen  

  two cover bolts, insert Allen  

  Wrench (provided with dryer)  

  into holes located on bottom  

  of cover on each side of air 

  intake grille. Make sure 

  wrench fits into head 

  of cover bolts and turn 

  CLOCKWISE until bolts stop 

  turning. When cover bolts 

  are screwed out all the way,  

  cover can be removed.

2.  To remove cover, place a  

  hand on each side of cover  

  and push up toward top 

  of dryer releasing cover 

  from studs at top of 

  mounting base. Lift cover 

  off mounting base by 

  pulling forward at the 

  bottom and upward at the 

  same time.

Hand Dryer

*

  Bobrick automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with  

  the operation of the automatic sensor.

1.  Hold the Installation Template against the wall in the desired  

  location of the installed dryer. See recommended mounting    

  heights above.
2.  Make sure line on template representing bottom of dryer  

 

  mounting base is horizontal and located at the desired height  

  above floor.

NOTE:

 Surface-mounted electrical supply entry is located in the 

lower right corner of the mounting base. Surface-mounted supply 

cable should be fitted in a conduit.
3.  Drill four holes for 1/4" (6.4mm) diameter mounting bolts or    

  screws (not furnished by Bobrick).
4.  Fasten mounting base securely to wall.

Men's Washrooms .............................................................................................................................................................46''   (117cm)

Women's Washrooms ........................................................................................................................................................44''   (112cm)

Children's Washrooms, ages  3-9 ......................................................................................................................................32''    (81cm)

Children's Washrooms, ages 9-12 .....................................................................................................................................36''    (91cm)

Children's Washrooms, ages 12-15 ...................................................................................................................................40''   (102cm)

Children's Washrooms, ages 15-18 ...................................................................................................................................44''   (112cm)

For the Handicapped .........................................................................................................................................................38''    (97cm)

*

 

Warm air hand dryer. Intended for use in a household environment by non-expert users. Not suitable for outdoor use.

**

  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or  

 

mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning  

 

use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.  

 

Cleaning and user maintenance shall not be made by children without supervision.

***

  If a fault develops disconnect the electrical supply, a qualified electrician should be called.

FOR PROPER ELECTRICAL CONNECTIONS, CHECK LOCAL 

BUILDING CODE. UNIT MUST BE INSTALLED BY

A QUALIFIED LICENSED ELECTRICIAN

Summary of Contents for TerraDry QuietDry B-7180






Reviews: