4- R
EAR
P
ANEL
O
VERVIEW
All optional output connectors/modules appear on that side of the device. The other features are
listed below.
Figure - 2.
Rear panel
Power Switch
The unit is turned on by depressing the Power button. The MODEL 745-T can be operated from 100
to 240V at a line frequency of 50-60Hz.
T0 output
A reference pulse output is available. It delivers a fixed amplitude pulse with adjustable width.
Terminated in 50
Ω
.
Clock BNCs
Clock input and clock output connectors are available. The CLK IN connector accepts either 10MHz or
80MHz (or custom frequency) clock frequency. The clock output (CLK OUT) comes from the CLK IN
connector or from the internal oscillator – if clock in signal not present.
AUX BNCs
The AUX connector is not used so far.
Ethernet Port
A RJ45 Ethernet connector is available to control the MODEL 745-T with a computer. See § 8-.
USB Port
A female USB connector can be available allowing serial communication with the MODEL 745-T. See
Chapter 8 – Programming for command syntax.
3/2/18
Berkeley Nucleonics Corporation, 2955 Kerner Blvd. San Rafael, CA 94901
[email protected], Call 800-234-7858 or Live-Chat @ www.berkeleynucleonics.com
8 of 35
