Thank you for purchasing a BN Thermic product. Manufactured to a high standard, this product will,
if used according to these instructions and properly maintained, give you years of trouble free
performance. Please ensure instructions remain with your customer for their reference.
SECTION A – USER INSTRUCTIONS.
For installation instructions go to page 4
1. INTRODUCTION & SPECIFICATION.
The B16C Thermostat is an easy to install and use 7 Day, 6/1
Day or 5 /2 Day Programmable Room Thermostat which offers
four time and temperature changes each day. It is designed to
provide automatic time and temperature control for underfloor
heating using air temperature and a floor sensor. All settings
are stored in the controller with battery back-up.
B16C- Programmable Heater Controller
Programming
7 Day, 6+1 Day or 5+2 Day (Default 5+2 Day)
Power Supply
230V ac 50 Hz 16A Maximum Load (Battery back-up)
Floor Temperature Sensor
NTC (10KΩ) +/- 0.5°C at 20°C
Temperature Range
1°C to 45°C (Default 5°C to 30°C)
Display
LCD + back light that comes on for short period when any button
pressed.
Number of Programs Per Day 4
Tamper Resistant
Facility for locking all buttons or just temperature adjustment
buttons.
Dimensions
86mm x 86mm x 15mm deep when recessed. Fits standard
recess boxes.
Electrical Protection
Class II IP20
Complies with:
EN 301489-1, EMC Directive 2014/30/EU,
EN60950-1:2006+a11:2009+a1:2010+a12:2011+
a2:2013
IMPORTANT
: PLEASE READ THESE INSTRUCTIONS, NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS
PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY.
INSTRUCTIONS FOR:-
PROGRAMMABLE CONTROLLER
Model:- B16C
REGISTER
: PLEASE REGISTER THIS PRODUCT ONLINE TO ACTIVATE
YOUR GUARANTEE AT www.bnthermic.co.uk
