BN Products BNG4000iE, User Manual

Page: 24 / 37

24
7. Starting the Engine
7.1 Recoil Start
1
）
Remove all loads from the output end.
2
）
Rotate the start switch to place the start button in the "start" position
。
3
）
Turn the AC BREAKER to “OFF”
When the gasoline engine starts in the hot engine status, please rotate
the start switch to place the start button in the "running" position.
4
）
Pull the recoil starter slowly until it is engaged, then pull it briskly.
5
）
After starting the engine, rotate the engine switch to place the start
button in the "run" position
。
6
）
To use electrical equipment, AC circuit breaker protector should be
placed in "on" position.
。
7.2 Electric Start
Start Button
Engine
Switch
Recoil Starter