manualshive.com logo in svg

BMW Z8, Owner'S Manual, Page: 154 / 175

Share
Download
BMW Z8 Owner'S Manual Download Page 154

154

n

Interior rearview mirror with automatic dimmer 

The interior rearview mirror with auto-
matic dimmer reduces glare from fol-
lowing traffic by adapting the intensity 
of the reflected images to correspond 
to levels of light registered by the unit's 
sensors. The mirror reverts to its 
undimmed setting as soon as the light 
source disappears. One light sensor is 
mounted on the front of the interior 
mirror housing. This forward-facing 
sensor measures light intensity in the 
area ahead of the vehicle. The second 
light sensor is integrated within the 
mirror's frame. The electronic control 
system compares the light intensity 
from front and rear. The difference pro-
vides the basic parameter used to mod-
ulate an electrical current and induce 
chemical changes in a semisolid layer 
incorporated in the lens.

520de096

The semisolid reacts chemically to this 
electrical current, thus providing dim-
ming of the mirror through an infinitely-
variable range – electrochromic tech-
nology.

As a result, it is no longer necessary to 
dim the interior mirror manually, and the 
driver can concentrate completely on 
traffic conditions.

Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG  

Summary of Contents for Z8
















































































































































































Reviews:

No comments