manualshive.com logo in svg

BMW Z8, Owner'S Manual, Page: 112 / 175

Share
Download
BMW Z8 Owner'S Manual Download Page 112

112

n

Engine oil 

Specified engine oil

The quality of the engine oil is 
extremely important for the function 
and life of an engine. Based on exten-
sive testing, BMW has approved only 
certain types of engine oils. 

Use only approved BMW High Perfor-
mance Synthetic Oil. 

If you are unable to obtain BMW High 
Performance Synthetic Oil, you can add 
small amounts of synthetic oil in 
between oil changes. Use only oils with 
API SH specification or higher.

Ask your BMW center for details 
concerning the specific BMW 

High Performance Synthetic Oil or syn-
thetic oils which have been approved.

<

You can also call BMW of North 
America at 1-800-831-1117 or visit this 
website: www.bmwusa.com for more 
detailed information.

Viscosity ratings 

Viscosity is the oil flow rating as estab-
lished in SAE classes.

Select the correct SAE class based on 
the climatic conditions in the area 
where you typically drive your BMW Z8 
roadster.

Approved oils are SAE classes 
5W-40 and 5W-30.

<

These oils may be used for driving in all 
ambient temperatures.

530us200

Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG  

Summary of Contents for Z8
















































































































































































Reviews:

No comments