BMW Z4 Owner'S Manual Download Page 114

Page: 114 / 330

▷

Press the brake pedal forcefully again from
the current pedal position.

▷

Engage selector lever position P.

If all functional preconditions are fulfilled, the en‐
gine switches off.

Air conditioner when the engine is
switched off

The air flow from the air conditioner is reduced
when the engine is switched off.

Displays in the instrument cluster

General information

The display in the tachometer in‐
dicates that the Auto Start/Stop
function is ready for an Automatic
engine start.

The display indicates that the
conditions for an automatic en‐
gine stop have not been met.

Total time with switched-off engine

ECO PRO, refer to page

243

driving mode: depending on the
vehicle equipment, the total time
that the engine has been
switched off using the Auto Start/

Stop function is displayed on an automatic en‐
gine stop.
The total time is automatically reset every time
the vehicle is refueled.

Functional limitations

The engine is not switched off automatically in
the following situations:

▷

In case of a steep downhill grade.

▷

Brake not engaged strongly enough.

▷

The external temperature is high and auto‐
matic climate control is running.

▷

The car's interior has not yet been heated or
cooled to the required level.

▷

Where there is a risk of window condensation
when the automatic climate control is
switched on.

▷

Engine or other parts not at operating tem‐
perature.

▷

Engine cooling is required.

▷

The wheels are at a sharp angle or the steer‐
ing wheel is being turned.

▷

Vehicle battery is heavily discharged.

▷

At higher elevations.

▷

The hood is unlocked.

▷

The parking assistant is activated.

▷

Stop-and-go traffic.

▷

Steptronic transmission: selector lever posi‐
tion in N or R.

▷

After driving in reverse.

▷

Use of fuel with high ethanol content.

Starting the engine

Functional requirements

Steptronic transmission

The engine starts automatically under the follow‐
ing preconditions:

▷

By releasing the brake pedal.

▷

When Automatic Hold is activated: press the
accelerator pedal.

Driving off

After the engine starts, accelerate as usual.

Safety mode

After the engine switches off automatically, it will
not start again automatically if any one of the fol‐
lowing conditions are met:

Seite 114

CONTROLS

Driving

114

Online Edition for Part no. 01402779113 - II/19

Summary of Contents for Z4











































































































































































































































































































































Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands

BMW Z4, Owner'S Manual

Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands