BMW Z4 Roadster Owner'S Handbook Manual Download Page 248

Page: 248 / 344

Side storage compartment,

left

There is a storage compartment on the left side
of the boot.

Through-loading system

Principle

The through-loading system makes it possible to
transport lengthy objects, for example skis.

Opening the through-loading

system

Slide the net down. Take hold of the net as
close to the edge as possible, next to the
bracket. There will be initial resistance to
overcome.

Pull the handle and fold the cover down.

In the boot: open the cover fully. The cover is
fixed by a magnet.

Seite 248

CONTROLS

Boot

248

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands