BMW Z4 Roadster, Owner'S Handbook Manual

Page: 232 / 344

3. "Climate comfort"
4. "Auxiliary ventilation" or "Auxiliary heating/
ventilation"
5. "Preconditioning for departure"
6. Activate the required departure time.
Display
The symbol on the climate display sig‐
nals that a departure time has been activated.
Standing air conditioning
via Remote Engine Start
Principle
Standing air conditioning cools or warms the in‐
terior to a comfortable temperature before start‐
ing to drive. In addition, the system cools, venti‐
lates or heats automatically depending on the
internal, external and set desired temperature.
Any snow and ice can be easier to remove.
The system starts the engine automatically for
this purpose and lets it run for a limited time.
Safety notes
DANGER
A blocked exhaust pipe or inadequate ventila‐
tion can allow harmful exhaust fumes to pollute
the area around the vehicle or enter it. The ex‐
haust fumes contain pollutants which are col‐
ourless and odourless. In enclosed spaces or
spaces with inadequate ventilation, the exhaust
fumes can also build up outside the vehicle.
There is a danger of fatal injury. Keep the ex‐
haust pipe clear and ensure sufficient ventila‐
tion. Do not switch on the standing air condi‐
tioning in enclosed or poorly ventilated spaces,
for example closed garages.
WARNING
When the standing air conditioning is operating,
high temperatures can be generated under the
body, for example because of the exhaust sys‐
tem. If flammable materials come into contact
with hot parts of the exhaust system, these ma‐
terials can catch fire. There is a risk of fire.
Make sure that no flammable materials, for ex‐
ample leaves, grass, gas, petrol, oil or other
flammable objects, can come into contact with
vehicle parts when the standing air conditioning
is operating.
Operating requirements
▷ Vehicle is in idle or standby state and not in
drive-ready state.
▷ Battery is sufficiently charged.
▷ For safety reasons, the system can only be
switched on twice in succession. The system
will be available again once the drive-ready
state has been activated and deactivated
again.
▷ Level in the tank is sufficient.
▷ Bonnet is closed.
▷ Ensure that the date and time are set cor‐
rectly in the vehicle.
▷ Open the side nozzles to allow the air to enter
the passenger compartment.
Enabling automatic engine start
The automatic engine start must be enabled be‐
fore using the system.
This enables the engine to switch on automati‐
cally in order to control the interior climate.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Aux. climate control/ventilation"
Seite 232
CONTROLS
Climate
232
Online Edition for Part no. xxx - X/18