BMW Z4 Roadster Owner'S Handbook Manual Download Page 109 | Manualshive

Page: 109 / 344

background image

Unfastening the seat belt

1.

Hold the seat belt firmly.

2.

Press the red button on the belt buckle.

3.

Guide the seat belt back up to the reel mech‐
anism.

Belt guide

When fastening the seat belts, make sure that
the belt guide is closed.
The magnet may open if the seat position has
been changed.

Seat belt reminder for driver and

front passenger seat

General

The seat belt reminder is activated when the
seat belt on the driver's side is not fastened.
For some country specifications, the seat belt re‐
minder is also active if the front passenger seat
belt is not fastened and heavy objects are on the
front passenger seat.

Display in the instrument cluster

A Check Control message is shown.
Check whether the seat belt has been
fastened correctly.

Front head restraints

Safety notes

WARNING

If the head restraints are removed or incorrectly
adjusted, they cannot provide protection as in‐
tended and head and neck injuries may result.
There is a danger of injury.

▷ Before a journey, re-install any removed

head restraints on all occupied seats.

▷ Adjust the head restraint so that its centre

supports the back of the head at eye level
where possible.

▷ Adjust the distance so that the head re‐

straint is as close as possible to the back
of the head. If necessary, adjust the dis‐
tance by adjusting the backrest angle.

WARNING

Parts of the body can become trapped when
the head restraints are moved. There is a dan‐
ger of injury. When moving the head restraint,
make sure that the area of movement is kept
clear.

WARNING

Objects on the head restraint reduce the pro‐
tective effect in the head and neck area. There
is a danger of injury.

▷ Do not fit any covers on the seats or head

restraints.

▷ Do not hang objects such as coat hangers

directly on the head restraint.

▷ Only use accessories that have been clas‐

sified as safe for attaching to the head re‐
straint.

▷ Do not use any accessories, for example

cushions, during the journey.

Seite 109

Seats, mirrors and steering wheel

CONTROLS

109

Online Edition for Part no. xxx - X/18

«
...
107
108
109
110
111
...
»

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Reviews:

No comments

Related manuals for Z4 Roadster

Brand: U.S. General Pages: 5

Brand: Lancia Pages: 191

Brand: Daihatsu Pages: 485

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

Brand: Draw tite Pages: 4

Brand: Mercedes-Benz Pages: 329

Brand: E&G Classics Pages: 3

Brand: Beper Pages: 52

Brand: Toyota Pages: 779

Brand: Pyle Pages: 14

Brand: VP Autoparts Pages: 2

Brand: Chevrolet Pages: 55

PerfectView CRT300

Brand: Waeco Pages: 200

Brand: Jeep Pages: 116

Brand: Jeep Pages: 52

2005 HIGHLANDER

Brand: Toyota Pages: 423

Brand: Malmbergs Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands