BMW Z4 2014, Owner'S Manual

Page: 71 / 220

bol appears in the display, accompanied by
the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol ap‐
pears in the display.
5. Press button 2.
6. Use button 1 to select one of the following:
▷ The function is deactivated.
▷ ... Select the corresponding
duration, 40 seconds, for instance.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Automatic headlamp control
Switch position : the low beams are
switched on and off automatically, e.g., in tun‐
nels, in twilight or if there is precipitation. The
LED next to the symbol lights up.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
Personal responsibility
The automatic headlamp control cannot
serve as a substitute for your personal judg‐
ment in determining when the lamps should be
switched on in response to ambient lighting
conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks, you
should always switch on the lamps manually
under these conditions.◀
Daytime running lights
The daytime running lights light up in posi‐
tion 0,
and . After the ignition is
switched off, the parking lamps light up in po‐
sition
.
Activating/deactivating
In some countries, driving with daytime run‐
ning lights is mandatory; for this reason, day‐
time running lights cannot be deactivated in
these cases.
Operating principle, refer to page
65 .
1. Switch on the ignition.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym‐
bol appears in the display, accompanied by
the word "SET".
3. Press button 2.
Seite 71
Lamps Controls
71
Online Edition for Part no. 01 40 2 957 378 - X/14