BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Page: 69 / 444

Speed warning
Principle
The speed warning can be used to set a speed
limit. A warning will be issued when this speed
limit is exceeded.
General information
The warning is repeated if the vehicle speed
exceeds the set speed limit again after drop-
ping below it by 3 mph/5 km/h.
Adjusting
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Warning at:"
6. Turn the Controller until the desired speed
is displayed.
7. Press the Controller.
Activate/deactivate
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Speed warning"
Applying current speed as the
speed warning
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Select current speed"
Activating/deactivating pop-
ups
For some functions, pop-ups are displayed au-
tomatically on the Control Display. Some of
these pop-ups can be activated or deactivated.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Pop-ups"
5. Select the desired setting.
Control Display
Brightness
1. "CAR"
2. "Settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
6. Press the Controller.
7. Turn the Controller until the desired bright-
ness is set.
8. Press the Controller.
Depending on the light conditions, the bright-
ness control may not be clearly visible.
Reset vehicle data
All individual settings can be reset to the fac-
tory settings when the drive-ready state is
switched off.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Reset vehicle data"
5. "Reset vehicle data"
Seite 69
General settings CONTROLS
69
Online Edition for Part no. 01405A604A9 - VI/22