BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 395

Page: 395 / 444

Safety information

NOTICE

Oil additives can damage the engine. There

is a risk of damage to property, among other

potential damage. Do not use oil additives.

NOTICE

Incorrect engine oil can cause malfunctions in

the engine or damage it. There is a risk of

damage to property, among other potential

damage. When selecting an engine oil, make

sure that the engine oil has the correct oil

specification.

Suitable engine oil types

Up to 1 US quart/liter of an engine oil with the

following oil specification can be topped up:

Oil specification

BMW Longlife-01 FE.

BMW Longlife-17 FE+.

The BMW Longlife-17 FE+ oil specification is

not suitable for the 50i gasoline engine.

Alternative engine oil types

If an engine oil suitable for continuous use

is not available, up to 1 US quart/liter of an

engine oil with the following oil rating can be

added:

Oil specification

API SL.

API SM.

API SN.

Viscosity grades

When selecting an engine oil, make sure that

the engine oil has a suitable viscosity grade.

The suitable viscosity grade is indicated on a

Viscosity grades

SAE 0W-20.

SAE 0W-30.

More information about suitable oil specifica-

tions and viscosity grades of engine oils can be

requested from an authorized service center or

another qualified service center or repair shop.

Coolant

General information

Coolant consists of water and coolant additive.
Not all commercially available additives are

suitable for the vehicle. The vehicle manu-

facturer recommends using coolant with the

BMW LC-18 specification. Do not mix additives

of different colors. Observe the water - additive

mixture ratio of 50:50. Information about suit-

able additives is available from an authorized

service center or another qualified service cen-

ter or repair shop.

Seite 395

Operating materials

MOBILITY

395

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands