manualshive.com logo in svg

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Introducing the BMW X5 xDrive45e PLUG-IN HYBRID 2022 – an extraordinary blend of luxury and sustainability. Discover the seamless combination of power and efficiency as you navigate the roads ahead. To ensure you unlock the full potential of this remarkable vehicle, download your free Owner's Manual from manualshive.com and enjoy every mile with confidence.

Share
Download
background image

Closing

Warning

The retaining strap of the fuel cap can be

jammed and crushed during closing. The cap

cannot be correctly closed. Fuel or fuel va-

pors can escape. There is a risk of injury or

risk of damage to property. Pay attention that

the retaining strap is not jammed or crushed

when closing the cap.

1.

Fit the fuel cap and turn it clockwise until

you clearly hear a click.

2.

Press on the fuel filler flap until it engages.

Emergency unlocking

It may be necessary in certain situations to un-

lock the fuel filler flap manually, for instance

with an electrical malfunction.
The release is located in the cargo area.

1.

Press the button, arrow 1, and open the

cover, arrow 2.

2.

Pull the green button with the fuel pump

icon. This silently releases the fuel filler flap.

3.

To open the fuel filler flap, press on the rear

edge, arrow. The fuel filler flap opens.

4.

Carefully open the fuel cap. Excess pres-

sure can build up in the fuel tank from gas-

oline vapor.

5.

Refuel the vehicle as usual. The residual

pressure in the tank may make refueling

difficult, for instance the filler nozzle may

shut off frequently.

Have the vehicle checked immediately by an

authorized service center or another qualified

service center or repair shop.

Seite 358

MOBILITY

Refueling

358

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Buick 2005 Terraza Owner'S Manual preview
2005 Terraza
Brand: Buick Pages: 428
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
Harbor Freight Tools 66242 User Manual preview
66242
Brand: Harbor Freight Tools Pages: 12
Honda 0SR95-HL4-211A Installation Instructions preview
0SR95-HL4-211A
Brand: Honda Pages: 3
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Thule 145012 Quick Start Manual preview
145012
Brand: Thule Pages: 2
Mobridge DA-G2 MOST150 Manual preview
DA-G2 MOST150
Brand: Mobridge Pages: 20
MBW i Wallbox Plus Owner'S Manual preview
i Wallbox Plus
Brand: MBW Pages: 40
Tuff Tonneaus Bunji Ute Installation Instructions preview
Bunji Ute
Brand: Tuff Tonneaus Pages: 4
ADAPT SOLUTIONS ASENTO EV-EXP18R Installation Manual preview
ASENTO EV-EXP18R
Brand: ADAPT SOLUTIONS Pages: 25

Brands by name

Popular brands

Load more brands