BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 309

Page: 309 / 444

Deleting stored functions

All stored functions will be deleted. The func-

tions cannot be deleted individually.
Press and hold the two outer buttons on

the interior mirror simultaneously for approxi-

mately 10 seconds until the LED on the interior

mirror flashes green fast.

Sun visor

Glare shield

Fold the sun visor down or up.

Glare shield from the side

Folding out

Fold the sun visor down.

Detach it from the holder and swing it to-

ward the side window.

Shift it back to the desired position.

Folding in

Proceed in the reverse order to close the sun

visor.

Vanity mirror

A vanity mirror is located in the sun visor be-

hind a cover. When the cover is opened, the

mirror lighting switches on.

Ashtray

Front center console

Opening

Press on the cover.

The ashtray is located in a cup holder. Fold

the ashtray cover upward.

Seite 309

Interior equipment

CONTROLS

309

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands