BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 239

Page: 239 / 444

Indicator light

▷

The indicator light lights up: the sys-

tem is switched on.

▷

The indicator light flashes: the set

speed limit has been exceeded.

▷

Gray indicator light: the system has been

interrupted.

Cruise Control

Principle

With the Cruise Control, a set speed can be ad-

justed using the buttons on the steering wheel.

The system maintains the set speed. The sys-

tem accelerates and brakes automatically as

needed.

General information

The system can be activated starting at

20 mph/30 km/h.
Depending on the vehicle setting, the Cruise

Control settings can change under certain

conditions. For instance, the acceleration can

change depending on the driving mode.

Safety information

Warning

The system cannot serve as a substitute for

the driver’s personal judgment in assessing

the traffic situation. Based on the limits of

the system, it cannot independently react

to all traffic situations. There is a risk of

accident. Adjust driving style to traffic condi-

tions. Watch the surrounding traffic situation

closely, be ready to take over steering and

braking at any time, and actively intervene

where appropriate.

Warning

The use of the system can lead to an in-

creased risk of accidents in the following sit-

uations, for instance:

▷ On winding roads.
▷ With high traffic volume.
▷ On slippery roads, in fog, snow, or wet

conditions, or on a loose road surface.

There may be a risk of accident or risk of

damage to property. Only use the system if

driving at constant speed is possible.

Warning

The set speed can be incorrectly adjusted

or called up by mistake. There is a risk of

accident. Adjust the set speed to the traffic

conditions. Watch surrounding traffic closely

and actively intervene where appropriate.

Warning

When towing with Intelligent Safety systems

enabled or Cruise Control switched on, in-

dividual functions may not work correctly.

There is a risk of accident. Switch off all In-

telligent Safety systems and Cruise Control

before towing.

Overview

Buttons on the steering wheel

Button Function

Cruise control on/off.

Continue cruise control with the last

setting.

Seite 239

Driver assistance systems

CONTROLS

239

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands