BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 181

Page: 181 / 444

General information

Vehicle inclination may cause the display to

vary.
Additional information:
Refueling, refer to page

356

Display

An arrow next to the fuel pump

icon indicates the vehicle side

on which the fuel filler flap is lo-

cated.
The current total range is dis-

played as a numerical value.

Indicator light in the instrument

cluster

The yellow indicator light illuminates,

once the fuel reserve is reached.

Tachometer

General information

Always avoid RPM in the red warning field. In

this range, the fuel supply is reduced to protect

the engine.
Depending on the equipment, the tachometer

is available in the SPORT driving mode or in

the M/S Sport program.
Depending on the equipment, the tachometer

can also be shown in the Head-up display.

Reduced engine speed range

The available engine speed range may be re-

duced due certain factors such as a cold drive

system. The tachometer display is automati-

cally adjusted depending on the available en-

gine speed range.

Power gauge

Principle

The power gauge indicates the available drive

power as a percentage.
The drive power consists of the power for ePo-

wer electric drive and the power of the com-

bustion engine.

General information

The following functions of the hybrid system

are displayed:

▷

Electric driving: ePOWER.

▷

Energy recovery: CHARGE.

▷

Acceleration boost: eBOOST.

ePOWER

Full Black Panel Display.

In ePOWER mode, the range for electric driving

is colored blue, arrow 1. The range highlighted

in blue can vary depending on the driving sit-

uation and Hybrid mode.
A mark indicates the power output by the hy-

brid drive on a scale, arrow 2.
If the mark is outside the range highlighted in

blue, the combustion engine is switched on,

arrow 3.
Instrument cluster with enhanced features: in

SPORT driving mode, the engine speed of the

combustion engine is displayed instead of the

output of the hybrid drive.
Additional information:

Seite 181

Displays

CONTROLS

181

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands