BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Page: 51 / 312

The relevant seat adjustment is done automat‐
ically.
The process is cancelled if a seat adjustment
switch or one of the buttons is pressed.
Safety function
1. Close the driver’s door or switch the ignition
on.
2. Keep button 1 or 2 pressed as desired until
the adjustment procedure has been conclu‐
ded.
Calling up has been disabled
After a short time, calling up saved seat posi‐
tions is disabled to prevent the battery from be‐
ing discharged.
To reactivate calling up:
▷ Open or close a door or the tailgate.
▷ Press a button on the remote control.
▷ Press the start/stop button.
Mirrors
Exterior mirrors
Overview
1 Adjusting
2 Left/right, automatic parking function
3 Folding in and out
General
Correctly estimating distance
Objects reflected in the mirrors are closer
than they appear. Do not gauge your distance
from following traffic based on what you see in
the mirror; otherwise there is an increased risk
of an accident.◀
Depending on the equipment, the mirror setting
is saved for the remote control currently in use.
When the vehicle is unlocked using the remote
control, this position is called up automatically if
the setting for this has been enabled.
Selecting a mirror
Switching to other mirror:
Push mirror changeover switch.
Electrical adjustment
Corresponding to movement of button
Saving positions
Seat and mirror position memory, see page 50 .
Adjusting manually
In the event of an electrical defect, for example,
press the borders of the mirror glass.
Automatic parking function
When reverse gear is engaged, the glass of the
mirror on the front passenger side tilts slightly
down. This improves the view of the kerb or
other obstacles near the ground, for example
when parking.
Activating
1. Push mirror changeover switch into
position for driver's mirror.
2. Engage transmission position R.
When towing a trailer, the automatic parking
function is switched off.
Seite 51
Adjusting Controls
51
Online Edition for Part no. 01 40 2 900 867 - 03 12 490