manualshive.com logo in svg

BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Share
Download
BMW X3 xDrive20d 2013 Owner'S Handbook Manual Download Page 49

fastened or if heavy objects are located on the
seat.

Damaged seat belts

In the event of stress due to an accident or dam‐
age:
Replace the belt system, including the seat-belt
tensioner, and have the belt anchorage
checked.

Checking and replacing the seat belts
Only have this work carried out at the Serv‐

ice Centre, as otherwise correct functioning of
this safety device is not ensured.◀

Front head restraints

Correctly adjusted head restraint

Head restraints adjusted to the correct height
reduce the risk of injuries to the neck in the event
of an accident.

Adjusting head restraint
Adjust the head restraint correctly for all

occupied seats, as otherwise there is an in‐
creased risk of injury in the event of an acci‐
dent.◀

Height

Adjust the head restraint so that its centre is ap‐
proximately at the height of your ear.

Spacing

Adjust the spacing so that the head restraint is
as close as possible to the back of the head.
If necessary, adjust the spacing using the incline
of the seat backrest.

Active head restraint

In the event of a severe rear-end collision, the
active head restraint automatically reduces the
gap to the head.

Reduced protection

▷

Do not fit any covers on the seats or
head restraints.

▷

Do not hang objects such as coat hangers
on the head restraints.

▷

Attach only BMW approved accessories to
the seat or head restraint.

Otherwise, the protective function of the active
head restraint is impaired and personal safety is
endangered.◀

Adjust height

▷

Up: pull

▷

Down: press the button, arrow 1, and slide
the head restraint downwards.

Removing

The head restraints cannot be removed.

Rear head restraints

Correctly adjusted head restraint

Head restraints adjusted to the correct height
reduce the risk of injuries to the neck in the event
of an accident.

Adjusting head restraint
Adjust the head restraint correctly for all

occupied seats, as otherwise there is an in‐
creased risk of injury in the event of an acci‐
dent.◀

Seite 49

Adjusting

Controls

49

Online Edition for Part no. 01 40 2 900 867 - 03 12 490

Summary of Contents for X3 xDrive20d 2013

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands