manualshive.com logo in svg

BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Share
Download
BMW X3 xDrive20d 2013 Owner'S Handbook Manual Download Page 101

Only use HDC in low gears or in gear position D
or R.

Increasing or reducing speed

Using the rocker switch for Cruise Control on the
steering wheel, set a speed of between approx‐
imately 6 km/h, 4 mph to approximately 25 km/h,
15 mph. The speed of the vehicle can be
changed by slightly pressing on the gas.

▷

Press the rocker switch upwards until the
resistance point is reached: the speed is in‐
creased in increments.

▷

Press the rocker switch upwards beyond the
resistance point: the speed continues to in‐
crease as long as the rocker switch is
pressed.

▷

Press the rocker switch downwards until the
resistance point is reached: the speed is de‐
creased in increments.

▷

Press the rocker switch downwards until the
resistance point is reached: when driving
forwards, the speed is reduced to approxi‐
mately 10 km/h, 6 mph. When driving back‐
wards, it is reduced to approximately 6 km/h,
4 mph.

Activating HDC

Press the button. The LED above the but‐
ton is illuminated.

Deactivating HDC

Press the button again. The LED turns off.
HDC is automatically deactivated at

speeds above approximately 60 km/h, 37 mph.

Display in the instrument cluster

The speedometer shows the se‐
lected set speed.

▷

Green: the system brakes the
vehicle.

▷

Orange: system in standby.

Malfunction

A message will appear on the instrument clus‐
ter. HDC is not available, for example due to a
high brake temperature.

Dynamic Damper Control

Principle

The system reduces unwanted vehicle move‐
ments when a dynamic driving style is used or
on uneven roads.
Depending on the condition of the road and the
driving style, this enhances driving dynamics
and driving comfort.

Seite 101

Driving stability control systems

Controls

101

Online Edition for Part no. 01 40 2 900 867 - 03 12 490

Summary of Contents for X3 xDrive20d 2013

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands