BMW X2 2022, Owner'S Manual

Page: 137 / 308

Canada: roadside parking light
Principle
The vehicle can be illuminated on one side.
Turning on
With radio-ready state switched off, press the
lever either up or down past the resistance
point for approx. 2 seconds.
Turning off
Briefly press the lever to the resistance point in
the opposite direction.
Welcome lights and
pathway lighting
Welcome lights
General information
Depending on the vehicle equipment and the
ambient brightness, individual lighting func-
tions may be switched on briefly when the ve-
hicle is unlocked.
Activate/deactivate
Switch position: ,
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Welcome lights"
The setting is stored for the driver profile cur-
rently used.
Pathway lighting
General information
The low beams stay lit for a short while if the
headlight flasher is switched on after the radio-
ready state is switched off.
Setting the duration
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Pathway lighting"
6. Set length of time.
The setting is stored for the driver profile cur-
rently used.
Automatic headlight control
Principle
The low beams are switched on and off auto-
matically depending on the ambient bright-
ness, for example in tunnels, in twilight or if
there is precipitation.
General information
A blue sky with the sun low on the horizon can
cause the lights to be turned on.
The low beams always stay on when the fog
light is switched on.
Activating
Switch position:
Seite 137
Lights CONTROLS
137
Online Edition for Part no. 01405A540A1 - II/22