BMW X2 2021, Owner'S Manual

Page: 112 / 304

Rear window wiper
Overview
Switching on
Turn the outer switch upward.
▷ Resting position of the wiper, position 0.
▷ Intermittent mode, arrow 1. When reverse
gear is engaged, the system switches to con‐
tinuous operation.
Clean the rear window
Turn the outer switch in the desired direction.
▷ In resting position: turn the switch downward,
arrow 3. The switch automatically returns to
its idle position when released.
▷ In intermittent mode: turn the switch further,
arrow 2. The switch automatically returns to
its interval position when released.
The function is deactivated if the washer fluid
reservoir level is low.
Fold-away position of the wipers
Concept
The fold-away position enables the wipers to be
folded away from the windshield.
General information
Important, for instance when changing the wiper
blades or for folding away under frosty condi‐
tions.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a risk
of injury or risk of damage to property. Make
sure that the vehicle is switched off when the
wipers are in the folded away state and the wip‐
ers are folded in when switching on.
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper mo‐
tor can overheat when switching on. There is a
risk of damage to property, among other poten‐
tial damage. Defrost the windshield prior to
switching the wipers on.
Folding away the wipers
1. Switch the ignition on and off again.
2. In frosty conditions, make sure that the
blades are not frozen to the windshield.
3. Press the wiper lever up past the point of re‐
sistance and hold it for approx. 3 seconds,
until the wipers remain in a nearly vertical po‐
sition.
4. Fold the wipers all the way away from the
windshield.
Seite 112
CONTROLS
Driving
112
Online Edition for Part no. 01405A2CF16 - II/21