BMW X2 2021, Owner'S Manual

Page: 107 / 304

▷ Intermittent operation or rain sensor, posi‐
tion 1.
▷ Normal wiper speed, position 2.
▷ Fast wiper speed, position 3.
When travel is interrupted with the wiper system
switched on: when travel continues, the wipers
resume at their previous speed.
Switching off and brief wipe
Press the lever down.
▷ Switching off: press the lever down until it
reaches its standard position.
▷ Brief wipe: press the lever down from the
standard position.
The lever automatically returns to its initial
position when released.
Interval mode or rain sensor
Concept
The rain sensor automatically controls the time
between wipes depending on the intensity of the
rainfall.
General information
The sensor is located on the windshield, directly
in front of the interior mirror. Without the rain
sensor, the frequency of the wiper operation is
preset.
Safety information
NOTICE
If the rain sensor is activated, the wipers can
accidentally start moving in vehicle washes.
There is a risk of damage to property, among
other potential damage. Deactivate the rain
sensor in vehicle washes.
Activating
Press the lever up once from its standard posi‐
tion, arrow 1.
Wiping is started.
The LED in the wiper lever is illuminated.
In frosty conditions, wiper operation may not
start.
Deactivating
Press the lever back into the standard position.
Seite 107
Driving
CONTROLS
107
Online Edition for Part no. 01405A2CF16 - II/21