BMW X1 - PRODUCT CATALOGUE, Owner'S Manual

Page: 96 / 314

After setting the height, move the head restraint
up or down slightly, making sure it engages
properly.
Folding down the head restraint
Only fold the head restraint back if no one will be
sitting in the seat in question.
▷ To the back: press the button, arrow 1, and
fold the head restraint back, arrow 2.
▷ Forward: fold the head restraint toward the
front as far as it will go. Make sure that the
head restraint engages correctly.
Removing
The head restraints cannot be removed.
Memory function
Concept
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
▷ Seat position.
▷ Exterior mirror position.
▷ Height of the Head-up Display.
General information
Different settings can be assigned to two mem‐
ory locations.
Depending on the vehicle equipment, the follow‐
ing settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Safety information
WARNING
Using the memory function while driving can
lead to unexpected movements of the seat. Ve‐
hicle control could be lost. There is a risk of an
accident. Only retrieve the memory function
when the vehicle is stationary.
WARNING
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
ment.
Overview
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press button. The LED in the button
lights up.
4. Press selected button 1 or 2 while the LED is
lit. The LED goes out.
Button was pressed inadvertently:
Press the button again.
The LED goes out.
Seite 96
CONTROLS
Seats, mirrors, and steering wheel
96
Online Edition for Part no. 01402896498 - X/18