BMW X1 2018, Owner'S Manual

Page: 201 / 314

Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if necessary
by using the maximum cooling or heating power,
and then keeps it constant.
Settings
Turn the ring to set the desired
temperature.
The selected temperature is shown on the dis‐
play of the automatic climate control.
The automatic climate control reaches this tem‐
perature as quickly as possible, if needed, by in‐
creasing the cooling or heating output, and then
keeps it constant.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Air conditioning
Concept
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the en‐
gine running.
Switching on/off
Press button.
The LED is illuminated with air condi‐
tioning switched on.
Depending on the weather, the windshield and
side windows may fog up briefly when the en‐
gine is started.
The air conditioning is switched on automatically
with the AUTO program.
When using the automatic climate control, con‐
densation water, refer to page
227 , develops
and drains underneath the vehicle. This is nor‐
mal.
Maximum cooling
Concept
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode.
General information
The function is available above an external tem‐
perature of approx. 32 ℉/0 ℃ And with the en‐
gine running.
Switching on/off
Press button.
The LED is illuminated with the system
switched on.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The air flow can be adjusted with the air flow ac‐
tive.
AUTO program
Concept
Air flow, air distribution and temperature are con‐
trolled automatically.
Switching on/off
Press button.
The LED is illuminated with the AUTO
program switched on.
Depending on the selected temperature, the in‐
tensity of the AUTO program, and outside influ‐
ences, the air is directed to the windshield, side
windows, upper body, and into the floor area.
Seite 201
Climate control
CONTROLS
201
Online Edition for Part no. 01402120596 - II/18