BMW X1 2018, Owner'S Manual

Page: 155 / 314

"Tire Pressure Monitor active. See label for
recommended pressures." is displayed.
You may interrupt this trip at any time. When you
continue the reset resumes automatically.
Messages
General information
A low tire inflation pressure may cause the DSC
Dynamic Stability Control to be switched on.
Safety information
WARNING
A damaged regular tire with low or missing tire
inflation pressure impacts handling, such as
steering and braking response. Run-flat tires
can maintain limited stability. There is a risk of
an accident. Do not continue driving if the vehi‐
cle is equipped with normal tires. Follow the in‐
formation on run-flat tires and continued driving
with these tires.
If a tire inflation pressure check is
required
Message
A symbol with a Check Control message ap‐
pears on the Control Display.
Symbol Possible cause
The system has detected a wheel
change, but no reset was done.
No reset was performed for the sys‐
tem. The system issues a warning
based on the tire inflation pressures
stored during the last reset.
Inflation was not carried out accord‐
ing to specifications.
The tire inflation pressure has fallen
below the level of the last reset.
Measure
1. Check the tire pressure and correct as
needed.
2. Reset the system.
If the tire inflation pressure is too
low
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, a symbol with a Check Control mes‐
sage appears on the Control Display.
Symbol Possible cause
There is a tire inflation pressure loss.
No reset was performed for the sys‐
tem. The system issues a warning
based on the tire inflation pressures
stored during the last reset.
Measure
1. Reduce your speed and drive moderately. Do
not exceed a speed of 80 mph/130 km/h.
2. At the next opportunity, for instance gas sta‐
tion, check and correct the tire inflation pres‐
sure in all four tires, if necessary.
3. Reset the system.
If there is a significant loss of tire
inflation pressure
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, a symbol with the affected tire ap‐
pears in a Check Control message on the Con‐
trol Display.
Seite 155
Safety
CONTROLS
155
Online Edition for Part no. 01402120596 - II/18