Oddment Tray
The oddment tray, which is connected to the
ULF control module via the vehicles wiring har-
ness, serves the purpose of:
Housing the send/receive or pairing
button, which must be depressed to activate
the pairing procedure between the phone and
the control module.
Pairing Button
A stand-alone send/receive or pairing
button is supplied for the 3 Series in order to
retain the cup holders. The button provides the
same function as the send/receive but-
ton on the steering wheel, plus is the button
that must be depressed to activate the pairing
procedure between the phone and the control
module.
Bluetooth
TM
Antenna
The Bluetooth
TM
antenna operates on a frequency of 2.45 GHZ and is installed in the
interior compartment of the vehicle. This antenna provides the wireless interface
between the Bluetooth
TM
enabled phone and the ULF Control Module.
System Operation
Initial Operation
Prior to using the system for the first time, the Bluetooth
TM
mobile phone that is to be
used must be paired with the ULF control module. This pairing procedure is necessary
in order to assign the digital code of the mobile phone to the ULF control module
installed in the vehicle. The pairing procedure is only required when a new phone is
introduced to the ULF system for the very first time or the list of paired devices is cleared
form the memory of the ULF module, it does not need to be performed every time the
phone is used with the system.
After pairing, the mobile phone is recognized automatically by the ULF control module
within 45 seconds after it is introduced into the vehicle and the ignition is turned on.
6
Bluetooth
TM