NOTE: Some phones may automatically display a statement asking the user
if the active call should be transferred to the ULF system shortly after the
Bluetooth
TM
connection is established. If the request is acknowledged the
call is automatically transferred into the vehicle/ULF system without having to
depress the send/receive button
Transfer Active Call from ULF to Phone
If you are currently in an active call and you need to leave the vehicle the call can be
transferred into the handset in several ways.
1. Ignition is turned off and you walk away from the vehicle. Once outside the 10 m
(32.8 ft) range a message may be displayed on the phone asking if the current call
should be maintained or ended, by maintaining the call it will be transferred to the
handset.
2. Depending on the model of phone being used the call can be transferred to the
handset by manually disconnecting from the Bluetooth
TM
network via the connec-
tions menu or selecting a transfer function in the settings menu of the phone (refer
to the user's manual of the phone for more information).
Linking Several Bluetooth
TM
Mobile Phones
Up to four Bluetooth
TM
mobile phones can be paired one after the other to the ULF con-
trol module. The pairing operation corresponds to the procedure described above.
The handset paired last has the highest priority. The telephone paired first will drop out
of the list if a fifth Bluetooth
TM
mobile phone is paired.
Note: For incoming and outgoing calls, only the user connected first to the system can
speak via the hands-free facility.
If two users enter the network or connection range simultaneously, only the user with the
highest priority (the user last paired during the initial pairing procedure) will be able to use
the hands-free function for incoming & outgoing calls. If the highest priority phone is
turned off the phone with the next highest priority will be connected.
Deleting Devices
The paired Bluetooth
TM
mobile phones can only be deleted as a single group from the
ULF control module.
The pairing procedure must first be activated, and then the send/receive button
on the installed eject-box or the pairing button located at the rear of the center console
must again be depressed for an additional 10 seconds after the "Bluetooth Pairing" mes-
sage is displayed on the radio in order to clear the list of paired devices from the control
module and the message "paired devices deleted" is displayed.
14
Bluetooth
TM