3. Depressing the button on the steering wheel until an audible "beep" is
heard through the vehicle speakers, at this point a call can be placed by using the
following voice commands:
• "Dial number" or "Dial phone"
• After the system asks for a number say the number.
Example: "123 456 7890"; the system will repeat the number requested
once you stop speaking momentarily, the number may also be displayed
depending on the vehicle and equipment/accessories installed.
• "Dial"
Note: Once the dial command is given the number will be displayed on the dis
play screen or radio; plus it will always be displayed on the mobile phone
after a call is placed.
4. Briefly depressing the button on the steering wheel will redial the last
number dialed.
For more information on using voice commands refer to the "Owner's Manual for Voice
Input System. The Convenient Alternative to Manual Control" (P/N 84 11 027 942)
Receiving/Accepting a Call
The call ringer in the Bluetooth
TM
mobile phone is audible when an incoming call signal is
received. At the same time, the signal is sent via the Bluetooth
TM
interface in the mobile
phone to the Bluetooth
TM
antenna in the vehicle. The ULF receives the incoming ring/call
signal via the Bluetooth
TM
antenna and mutes the radio. The incoming ring/tone signal is
then also transmitted to the vehicle speakers.
The following options are available for accepting a call:
3 Series without Display Screen:
• Press send/receive button on MFL (Steering Wheel)
• Press send/receive button in the center console
• Press send/receive key on mobile phone
5 Series and X5 SAV without Display Screen:
• Press send/receive button on MFL (Steering Wheel)
• Press send/receive key on radio
• Press send/receive button on the oddment tray (Center Console)
• Press send/receive key on mobile phone
11
Bluetooth
TM